Made-to-measure wardrobes with bifold doors in Alzira
Wardrobes with bifold doors in Alzira solve a very specific problem: they open up a large part of the front in one go, without the panels overlapping as they do on a sliding system and without sweeping half the room like a hinged door. The panels fold onto one another and stack to one side. Here we explain when this system is worth choosing, how much space it needs in front, and which measurements to have to hand before you configure your wardrobe.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
How a bifold front folds away
A bifold front is made up of narrow panels joined by hinges that fold concertina-style. When you pull the first panel, the rest fold in on themselves and stack at one end of the opening, or split into two stacks if the wardrobe is wide and opens from the centre.
That is why bifold doors really come into their own on wide wardrobes: they leave a far larger stretch open than a two-door sliding wardrobe, where one half is always covered. If your wardrobe is small and a single door would do, the system adds little.
The stack of folded panels doesn't disappear. It takes up a few centimetres at one side of the opening, and that thickness has to be deducted from the usable width when the interior is designed.
When it makes sense to open up a large part of the wardrobe
Think about how you use the wardrobe every day. If you just look for one item and close it again, any system will do. If, on the other hand, you need to see everything at once, for instance to sort out a seasonal change-over or put together a complete outfit, a wardrobe with bifold doors gives you an almost full view.
It also helps when the wardrobe stores bulky items: suitcases, bedding, archive boxes. With a sliding system you have to shuffle sideways to reach the covered section; with a bifold front you have direct, head-on access.
Another typical case is a wardrobe in a short hallway or entrance hall, where you pass through quickly, open everything and close it again. A set of lightweight panels can be handled with one hand and needs no manoeuvring.

Space in front of and beside the panels
Bifold panels don't need the full swing radius of a hinged door, but they aren't flat either. As they fold, the whole set moves out into the room, leaving a middle section that sticks out. You need to leave a clear strip of a few hand-spans in front of the wardrobe so the movement doesn't catch on the bed, a chair or a laundry basket.
The second limit is at the side. The folded stack sits against a wall or partition, and if there is a door frame, a radiator or a switch there, the opening is compromised. In a home in Alzira with narrow hallways, this detail can decide the choice. When measuring up, it's worth marking the path on the floor with tape and checking that no furniture gets in the way.
Have you already measured the space?
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Number, width and weight of the panels
- 01
More panels means more hinges and more visible joints, but also narrower, lighter panels. Fewer panels gives a cleaner front, but with heavier panels that put a strain on the fittings over the years.
- 02
These are the three decisions made at the design stage:
- 03
A mirrored panel needs more care with the hardware than a plain one, so it's best decided early in the project.
Compatibility with drawers and shelves
With bifold doors the interior is seen in sections, and that shapes the layout. Shelves, hanging rails and shoe areas fit in without any problem, as long as the folded stack doesn't cover the first module.
Interior drawers need more thought. If the front folds to one side, the drawer on that side can end up half covered by the panels, so it is separated from the side panel with a fixed module or placed in the section that always stays clear.
Good practice is to reserve the folded-stack area for fixed shelves or hanging clothes and put the drawers in the centre, where access is complete. Most layouts with this system are built around that idea.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Hardware, adjustments and maintenance
A bifold front rests on a top track and on hinges between the panels, and sometimes on a bottom track as well. These parts work every day, so fine adjustment matters as much as the quality of the hardware: well-aligned panels, even gaps and a closure that doesn't scrape the floor.
With use, bifold doors need an occasional check: tightening screws, clearing dust from the track and making sure the panels haven't dropped by a few millimetres. It's a simple job, as long as the design leaves access to those points.
When we prepare your project in Alzira and the surrounding area, we specify which track suits the weight of the panel and the width, so the system is neither undersized nor over-specified and costlier than it needs to be.

Ask us to come and measure up in Alzira
- 01You leave us your name and your area.
- 02We message you on WhatsApp to agree a day.
- 03The measuring visit costs €50 and is free if you place an order.
How they differ from sliding and hinged doors
Compared with a sliding wardrobe, a wardrobe with bifold doors wins on access but loses on clearance: it needs space in front. Compared with a hinged one, it wins on swing space, although the panels are more numerous and have more hardware.
Three factors help you decide:
- How much of the opening you want to open at once: if it's a lot, that favours bifold.
- How much clear space there is in front: if there's very little, sliding doors are the safer choice.
- How much daily use it will get: the more it's used, the more a system with few moving parts makes sense.
If you can't decide between the three options, try it in the configurator with your measurements and compare what's proposed.
Factors that affect the cost of a bifold system in Alzira
- 01
No wardrobe has a fixed price in advance, and bifold doors even less so, because several variables come into play at once. The number of panels, the type of hardware, the front material and the finish all weigh on the final quote.
- 02
It also depends on whether the wardrobe is built-in or freestanding, whether it has a bottom track and how much interior has to be fitted out behind. A simple three-panel plain design is priced differently from a six-panel set with a mirror and drawers.
- 03
For an approximate estimate, open the configurator with your measurements. If you'd rather talk it through, send us a quote request with photos of the space and the team will reply with a proposal.
Enquiry
Tell us about your project in Alzira
- 1We read your message and look at your photos.
- 2We reply on WhatsApp with a first figure.
- 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.
We don't cut a single board until you've approved the design and the price.
Questions
Frequently asked questions about wardrobes in Alzira
After installation: warranty and care for your wardrobe.
Does a bifold door take up space when it opens?
Yes, though less than a hinged door. The panels move a few centimetres into the room as they fold and then stack to one side. You need to keep that strip clear, along with the side where the stack folds away.
With the panels folded back, is the whole interior visible?
Not quite, because the folded stack covers a section at one end. You see considerably more than with a sliding wardrobe, and the interior layout is planned so that what you use most sits in the clear part.
Can it go in front of interior drawer units?
Yes, with some caveats. Drawer units go in a section the panels don't cover when folded, or next to a fixed divider module. That way the drawer opens without hitting the panels.
What determines how many panels the front has?
Mainly the width of the wardrobe, the side it opens from and the weight of each panel. The more panels, the lighter and narrower they are, but also the more hinges. We fine-tune it when we study your measurements.
Do bifold doors work in a small bedroom?
If there is a reasonably clear space in front, they let you see and reach almost the whole interior without having to move the bed. If the space in front is very tight, it's worth considering sliding doors instead.
Shall we talk about your project?
Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

