Made-to-measure corner wardrobes in Alzira

Made-to-measure corner wardrobes in Alzira turn the meeting point of two walls into storage, a spot that is almost always left empty or filled with odd bits of furniture. The difficulty isn't building the unit, but making sure the back of the corner can be reached without climbing halfway inside. A good design divides up the interior, coordinates the doors on the two fronts and works around windows and frames. Here's how we think through each step before anything is made.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

What a corner wardrobe solves

Plan · example Floor plan · corner wardrobe
2,60 m 2,10 m 123
1Corner module put to good use 2Doors that don't get in each other's way 3Two fronts with a matching finish

A corner has two walls and a dead angle. A well-planned corner wardrobe uses both walls, closes at the front and offers more linear metres of storage than two separate wardrobes in the same space.

What sets it apart from a straight wardrobe is the apex: the depth doubles there, and it's the hardest point to reach. That's why the design decides what goes in that section, whether it's a hanging rail, a rotating shelf or a module that is separated from the rest.

It works in bedrooms in Alzira and the surrounding villages, home offices and guest rooms, but also in hallways with a free side wall. The condition is that both walls are clear and long enough for two sensible fronts.

01

L-shaped wardrobe, corner module and continuous fronts

There are three ways to approach a corner wardrobe, and each answers a different need.

  • Single-piece L-shaped wardrobe: one carcass that wraps around the corner, with a continuous front and a shared interior angle.
  • Two adjoining wardrobes: each wall gets its own module and there is a joint at the apex, with the advantage that they can be installed separately.
  • Diagonal corner module: an angled front that cuts across the corner and gives direct access to the back.

The L-shaped carcass makes use of more volume, although the angle is harder to use. Adjoining modules make installation easier in rooms with narrow stairs. The diagonal accepts less depth, but it's the most convenient for reaching what you store.

Made-to-measure white-doored corner wardrobe with oak handles in a bright bedroom in Alzira
02

How to reach the back without creating unusable areas

The biggest risk with a corner wardrobe is turning the apex into a hole nobody can reach. There are several ways to avoid it, depending on how you'll use it.

If it's for hanging clothes, a rail is left on each side of the apex and the central space is filled with a shelf module accessed from one front. If the section is for large items, such as suitcases or a vacuum cleaner, we make a deep recess with its own door.

An alternative is to use a blind module only in the deepest part, with the option of removing a panel to retrieve whatever ends up at the back. We decide this when we look at what you store and how often you need it.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Doors and drawers that don't get in each other's way

  • 01

    Two fronts meet in the corner, and their doors can clash when they open. If two hinged doors swing around the same point, one blocks the other and the handles knock together.

  • 02

    The solution is to separate the swings: a normally opening door on one side and a fixed panel or a door hinged the opposite way on the other. You can also have sliding doors on one wall and hinged doors on the other, as long as there's room.

  • 03

    With drawers, the rule is similar. A drawer next to the apex needs the neighbouring door to be fully open before it can come out. That's why we usually leave a fixed spacer module of a few centimetres between the two fronts.

04

Adapting to walls, windows and walkways

A corner is rarely perfect. It may have a window close by, a door frame right beside it, or a wall that protrudes because of a radiator or a pipe. The corner wardrobe adapts to what's there, not the other way round.

If a window sits close to the apex, the module is set back so it doesn't block the light or make it hard to open the sash. If the bedroom door is next to the corner, we measure the frame's clearance so the front leaves room to pass and doesn't hit the door when it opens.

In homes in Alzira with older partition walls, it's common for the two walls not to form an exact ninety degrees. This is corrected with adjustment profiles and noted when measuring.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

What changes when measuring a corner in Alzira

Measuring a corner takes more points than a straight run. We take the length of each wall, the height at three points and, above all, the angle between them, because if it isn't square the front won't close properly.

Also note where each obstacle begins: sockets, phone points, frames and the skirting board. A hand-drawn sketch with dimensions is more help than a photo alone, although the photo clarifies the details.

When you send the information, say which part of the apex you want to be accessible. With that, the team prepares a proposal and, after the measuring visit, adjusts the plan with the real figures. The visit costs €50 if no order follows and is free if you order the wardrobe.

Made-to-measure white and oak corner wardrobe with an open door showing a hanging rail, drawers and baskets in a bright bedroom in Alzira
Measuring visit

Ask us to come and measure up in Alzira

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

What to store in each section of a corner wardrobe

Dividing the contents by section stops the corner filling up with things nobody can find. On the longer front, put your everyday clothes, because you see everything as soon as you open it. On the shorter one, put what you use less often: coats, suits, formal wear.

The apex takes what you rarely get out but which takes up a lot of room: suitcases, blankets, a winter duvet. One high shelf and one low shelf, with the middle left clear, let you reach those items without pulling everything else out.

If the corner wardrobe is going in a shared room in Alzira, each wall can be assigned to one person, with a rail at each person's height, so that the apex works as a shared area for shoes and accessories.

07

What to check in the design before we build

  • 01

    Before giving the green light for manufacture, go over the plan with three questions. Can I reach everything I store in the apex without stretching? Does each door open without touching the next one? Can any furniture in the room be moved without hitting the front?

  • 02

    It's also worth looking at the finishing details: how the wardrobe ends at the side wall, whether it has a ceiling moulding and how the joint between the two sections is covered.

  • 03

    With the configurator you can try out several layouts before deciding. For the later steps, see how we work. Manufacture takes two to three weeks on average, and installation is arranged once the pieces are ready.

Enquiry

Tell us about your project in Alzira

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Alzira

After installation: warranty and care for your wardrobe.

Is a corner wardrobe worth it compared with a straight one?

Not always. If the apex is inaccessible, some of the volume is lost. You gain when the design deals with the angle using a rail, a diagonal or a recess with its own door.

How do you hang clothes in the angle of the wardrobe?

With two rails that reach almost to the apex or with one rail on each wall, leaving a central section for shelves. We avoid a single straight rail that would force you to reach the back.

Is an L-shaped wardrobe better than two wardrobes side by side?

The L-shaped wardrobe is a single piece and uses more volume. Two adjoining wardrobes are easier to transport and install. The choice depends on the stairs, the lift and the finish you want.

Can a corner wardrobe go next to a window?

Yes, as long as the module is set back far enough not to cover the glass and the doors can open. Sometimes a low section is fitted or the front is cut on the diagonal.

What if the two walls don't form a right angle?

We measure the real angle and correct the gaps with adjustment profiles. It's normal in older buildings and doesn't stop us making the wardrobe.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote